SPB Case/Astec/Toro 660 Series

Will fit the 660

PULL BLADES

  • All pull blades feature a solid shaft bullet in your choice of diameter: 2”, 3” and 4 (Larger, optional sizes available)
  • Blade shank thickness is 1”up to 30”cover, 1 ¼” from 36”-42” and 1 ½”up to 48”
  • Standard depths are 24”, 30”, 36”, 42” and 48” (Depth is adjustable 2-depth with 6” increments, i.e. 18”-24”)

CHUTED BLADES

  • Blade shank thickness is 1” up to 30” cover, 1 ¼” from 36”-42” and 1 ½” up to 48”
  • All standard blades feature a closed bottom unless you specify open or partially open bottom.

BUG WIRE OR DROP BLADES

  • Standard inside chutes – ¾” and 1”
  • Standard radius is 2.5” and 4.5”
  • Standard cover depths are 24”, 30”, 36”and 42” (Depth is adjustable 2-depth with 6” increments, i.e. 18” – 24”)

STANDARD PULL BLADES

  • Standard inside chutes – ¾”, 1”, 1 ¼”, 1 ½”, 1 ¾” and 2”
  • Standard radius is 7.5”
  • Standard cover depths are 24”, 30”, 36”and 42” (Depth is adjustable 2-depth with 6” increments, i.e. 18”-24”)

LARGER RADIUS PLOW BLADES – cable TV, fiber optics, etc.

  • Standard inside chutes – 1”, 1 ¼”, 1 ½”, 1 ¾”, 2”, 2 ½” and 3”
  • Standard radius is 10”, 12.5” and 15”
  • Standard cover depths are 24”, 30”, 36”and 42” (Depth is adjustable 2-depth with 6” increments, i.e. 18”-24”)

GAS BLADES – for plastic gas pipe, w/wire and ribbon tubes

  • Standard inside chutes – 1”, 1 ½”, 2”, 2 ½” and 3”
  • Standard gas radius
  • Standard cover depths are 24”, 30”, 36”and 42” (Depth is adjustable 2-depth with 6” increments, i.e. 18”-24”)

3 PHASE POWER BLADES

  • Standard inside chutes – 1 ½”x 4 ½”, 1 ¾” x 5 ¼”, 2” x 6”and 2 ½” x 7 ½”
  • 3-Phase radius
  • Standard cover depths are 30”, 36” and 42” (Depth is adjustable 2-depth with 6” increments, i.e. 18”-24”)

We offer the best products in the industry

Scroll to Top